When selecting a suitable lubricant for the motor mounting plate, multiple factors need to be considered to ensure that the lubricant can meet the working environment and performance requirements of the motor. Here are some key selection points:

1、 Consider the working environment of the motor

1) Temperature range:

The motor generates heat during operation, so the selection of lubricant should take into account the operating temperature range of the motor.

Choose lubricant with excellent high and low temperature performance to ensure stable performance within the operating temperature range of the motor.

2) Load size:

The load size of the motor will affect the selection of lubricant.

High speed and high load motors require the use of lubricant with higher strength and wear resistance.

3) Other environmental factors:

Consider whether there are factors such as water and chemicals in the environment where the motor is located that may affect the performance of the lubricant.

Choose lubricant with water resistance, rust prevention and other properties to adapt to these special environments.

2、 Choose the appropriate type of lubricant

1) Calcium based grease:

Widely applicable to low-speed, low load, and low-temperature situations.

Suitable for motors with light load and low speed in the field of home appliances.

2) Lithium based grease:

Suitable for medium to high speeds, medium to high loads, and room temperature conditions.

Widely used in the fields of automotive, electric tools, and other industries as motors for medium loads and speeds.

3) High temperature lubricating grease:

Suitable for motors used in high temperature and high load environments, such as electric vehicles, elevators, etc.

Has excellent high temperature resistance and lubrication performance.

3、 Pay attention to the performance indicators of lubricant

1) Wear resistance:

Choose lubricant with good anti-wear performance to reduce the wear of motor bearings and other components.

2) Mechanical stability, colloidal stability, and antioxidant safety:

These properties ensure that the lubricant remains stable and not easily deteriorated during the operation of the motor.

3) Low temperature starting torque and operating torque:

Choose lubricant with extremely low temperature starting torque and operating torque to ensure that the motor can start and operate smoothly in low-temperature environments.

4) Low friction coefficient and noise level:

Low friction coefficient and noise level can reduce the energy consumption and noise level of the motor, and improve the overall performance of the equipment.

4、 Choose high-quality brands and certified products

1) Brand selection:

Choose lubricants from well-known brands that typically have more advanced technology and stricter quality control systems.

2) Certified products:

Choose certified products that comply with ISO specifications or other relevant international standards to ensure the quality and performance of lubricant.

5、 Correct application method and maintenance

1) Cleaning:

Before applying lubricant, it is necessary to clean the lubrication area thoroughly, using a cloth or brush to remove dirt and old lubricant.

2) Apply:

Use a specialized grease applicator to apply appropriate grease to the lubrication points.

Be careful not to use too much grease, as excessive grease can cause excessive heat and increase coating wear.

3) Regular inspection:

For high-speed and high-temperature motors, lubricant is prone to failure, so it is necessary to regularly check the lubrication parts and reapply.

In summary, selecting the appropriate lubricant for the motor mounting plate requires comprehensive consideration of the motor's working environment, the type and performance indicators of the lubricant, as well as the brand and certification status. Meanwhile, the correct application method and maintenance are also key to ensuring the stable operation of the motor.